Products
-
All Systems Go Games "Baby" Birgenskald, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games "Grouch" Gordeljart, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games "Jolly" Jorgessen, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games "Loverboy" Logni, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games "Normal" Bridge (Terrain)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$24.99
-
All Systems Go Games "Snoozer" Svartlevari, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games "Surgeon" Styr, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games "TP" Torlief, Stoutmaster (Male Dwarf Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
D20 Collective 1d6 Moving Eye Sharp Edge DnD Dice | Acrylic RPG Gaming Dice
Don't need a 7 piece set? Get your d6s here! D6s are same size included 7 piece sets. Same magical, floating eyeball! *Liquid in these dice can freeze and cause dice to crack. Please store dice above freezing temperatures.
$4.75 $3.00
-
3D Printernational 3D Printed Spiral Retractable Sword
The Retractable Spiral Sword Captivating synthesis of science fiction, technology, and handiwork. A real conversation starter, this unusual and striking sword is ideal for collectors, enthusiasts, or anybody wishing to add a little of mystery to their décor.Designed to extend and retract. We can 3D print them in over 100 colors, if you can't find your color option in the variation, send us a quick message to custom it to your required color. Handle itself is 7.5in and when it's fully extended its 30in. just needs a flick to extend it out. all one piece. (110.58 × 110.58 × 185.42mm)Made more for Cosplay, Costumes, Decoration, and Entertainment. Not made for dueling or Jedi fights. Free Shipping, ZERO Sales tax.
$59.99 - $69.99
-
3D Printernational 3D Printing Tool Kit Pro Grade Portable Tool Box contains 158 Pcs for Removing, Cleaning, and Finish 3D Print Accessories/Model Building
Pro Grade 3D Printing Tool Kit,158 Pcs Portable Tool Box for Removing, Cleaning and Finish 3D Print Accessories/Model Building (Multi-Purpose) Pro Grade ToolKit Product Description COMPACT AND ROBUSTA great set of tools to help you complete the finishing touches on your print job.This toolkit contains 158 pieces of different tools to help you get the most out of your 3D Printing projects, this great toolkit will meet all your post printing needs all while being packed in a compact box to make sure nothing goes missing. MEET YOUR VARIETY OF NEEDS The deburring knife can easily remove burrs from the edges of your model, the flat file can wear away distorted parts of the model's surface and the carving knife can give the model better detail, especially in narrow areas. This tool set comes with different kinds of craft knives and blades as well as common tools for 3D printing. Good quality and durability at a reasonable price to meet your different needs. THE IDEAL SET The ideal combination of handy tools. This 3D printer tool kit contains all types of essential tools, perfect for removing, cleaning and finishing your 3D print. It is the perfect hand tool for all 3D printing professionals ,hobbyists and professionals applications. The entire kit is packaged in a handy plastic storage box so you can easily take your kit anywhere. In addition, you can conveniently store the complete kit to prevent small tools from getting lost. WIDE RANGE OF APPLICATIONS Multi-purpose design for precise applications such as: 3D print making, DIY Gouda models, paper, plastic, cardboard, leather, foam board, wood or other DIY craft projects, providing you with excellent flexibility. SATISFACTORY GOODS AND SERVICES Our team is dedicated to bringing only top of the line products for our costumers, these toolkits have carried out years of use and have been tested in real-world work. Each 3D printing tool meets strict quality standards. Whats In The Box?The 158 Pcs 3D printing tool set includes: 1x portable tool box1x long nose pliers1x plastic calipers1x Hand Drill10x Drill Bits32x screwdriver bits1 x modular screwdriver8x carving tool knife5x file2x tweezers1x art knife50x 11# Art Blade1x Craft Knife30x Craft blade10x 3d printer nozzle cleaner1x Wire Cutters3x cleaning Brush Set1x Removal Tool Scraper
$89.00 $80.00
-
PreppComm 3m High Performance RF Coax Cable
Low Loss 3m (9.8') Antenna Male to Female SMA Coax Cable This LMR-100 low loss coaxial cable is part of the Professional Station GO Bag outfit for a complete radio station in a portable 8 pound bag. It connects from the DMX-40 or MMX Morse Code Transceiver output antenna connector to the 40/20M No-Tune End-Fed Antenna, also included in the GO Bag, and manufactured by PreppComm for low SWR across the entire 40/20M band. Replacement or Extend Length The cable can be used to replace a damaged or missing cable from a GO Bag system, or can also be used to extend the original cable length, if desired. Up to 4 cables can be daisy-chained, for a total length of almost 40 feet. Beyond 40 feet, LMR-200 is recommended to reduce power loss during transmit.
$14.95
-
PreppComm 5V to 12V cable
Voltage Conversion Cable This voltage conversion cable is a replacement product when original cable is damaged, lost, or fails to operate properly. The cable plugs into the 2.1 amp USB port on the 28 amp-hour Power Bank supplied with the Professional Station Go Bag, and generates sufficient output power at 12 volts to operate the DMX or MMX in receive and transmit mode. Note that while you can receive when plugged into the 1 amp output USB port, your ability to transmit will be severely impacted or prevented. The voltage conversion cable will of course work with any power bank with a 2 amp output port. IMPORTANT: This cable provides 12V with current limit. This prevents damage to your PA (power amplifier) when under stress from high SWR. This is a very valuable safety feature.
$14.95
-
PreppComm 5W Dummy Load
HF, UHF/VHF 5W Dummy Load to 6GHz You asked for it, so here it is, a 5W Dummy Load, with a male SMA connector. This is rated up to 6 GHz, so HF should be no problem for it, but you can use it on your VHF/UHF radios as well with no problem. The radiator fins are a very nice touch in the design, and it is 100% efficient: it turns every microwatt of your RF energy into ... heat! It comes with a cap to protect the SMA plug and keep it clean of debris when not in use. This ensures a good electrical contact when you plug it in. Dirt on the contacts and cause poor conductivity and thus high resistance above the desired 50 ohms, and thus, high SWR. So keep it clean! Don't lose the cap!
$9.95
-
PreppComm 8m High Performance RF Coax Cable
Low Loss 8m (26 ¼ foot) Antenna Male to Female SMA Coax Cable This LMR-100 low loss coaxial cable is the big brother to the 3m cable that is a part of the Professional Station GO Bag outfit for a complete radio station in a portable 8 pound bag. It connects from the DMX-40 or MMX Morse Code Transceiver output antenna connector to the 40/20M No-Tune End-Fed Antenna, also included in the GO Bag, and manufactured by PreppComm for low SWR across the entire 40/20M band. Replacement or Extend Length This high power coax cable can be used to replace a damaged or missing cable from a GO Bag system, or can also be used to extend the original cable length, if desired. Up to 2 cables can be daisy-chained, for a total length of over 52 feet with slightly increased loss of power to the antenna. Or, you can add this to your 3m cable and get about 36' of total length. Lengths longer than 40 feet require LMR-200 or LMR-400 to reduce power loss during transmit.
$27.95
-
All Systems Go Games Aberrant Hellhounds
Purchase any 3 minis from DM Stash's Ill Omens Pt. III: Aberrant Ascension set (this one included) to digitally receive with your order the companion 106-page 5E module by DM Stash for character levels 16-20! ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$10.99
-
All Systems Go Games Aboro-Ko, Cleric of Tears (Male Human Pirate Cleric)
Purchase any 3 minis from the Darkest Depths set (this one included) to digitally receive Arisen Depths Pt. III: Beneath the Waves! It is an 89-page 5E module by DM Stash for character levels 13-15. ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99 - $19.99
-
Einstar-US Accessories Pro Kit
The Accessories Pro Kit is a professional marker set designed to improve scan quality and tracking stability in 3D scanning workflows. It includes 6mm magnetic marker balls, adhesive markers, marker cards, fixture columns, and a 300mm turntable. With flexible and reusable magnetic components, the Accessories Pro Kit is especially effective for scanning featureless, or complex objects—ensuring accurate alignment and minimizing tracking loss.
$399.00
-
PreppComm Adaptor Cable: SMA Male to SO-239 to PL-239
Highest Quality Strain Relief Plus Connector Adaptor If you are using an existing antenna system, before you do, make sure the SWR is below 2:1 before connecting it to the MMX or DMX-40. This adaptor cable is designed to connect between the rear SMA female antenna connector on the MMX or DMX-40 and the standard antenna PL-239 plug. It also serves a second purpose, which is to reduce mechanical stress on both the PL-239 and its attachment to its likely stiff RF cable, and the very light and portable MMX with its PC-mounted SMA female connector. These cables are extremely well built, with multiple layers of sleeving to reduce the stress on the solder joints, in order to provide long life. At the SMA connector end, note the two-lawyer cable relief design. At the SO-239 end, a 3-layer cable relief design is used to compensate for the larger connector. In addition, a clear cap is provided to protect the internal surfaces of the connector when not in use. Keep an Extra on Hand! We suggest, at this low price, you consider purchasing two adaptors, as all of the stress caused by the heavy duty PL-239 connector and coax will be handled by this adaptor, and thus, depending on your use case, it is the most likely to fail first. Don't be without when that happens after a few years - have a spare handy!
$4.95
-
All Systems Go Games Aegiros, the Sea Jotunn (Epic Boss)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$34.99
-
Runic Dice African Bloodstone Hand Carved Gemstone DND Dice Set
African Bloodstone Gemstone DND Dice Set Embrace the primal power of the earth with this stunning set of African Bloodstone gemstone DND dice set! Each die is meticulously hand-carved, showcasing the unique beauty and rich history of this captivating gemstone. Channel the energy of ancient flames as you roll these exquisite dice, adding a touch of magic to your tabletop adventures. What's in the box? ✅ 7 Hand-Carved Gemstone Dice (d4, d6, d8, d10, d%, d12, d20)✅ Free Dice Box (automatically added to cart for full sets) ✅ Felt Pouch (for single d20) Features: ✅ Each die is meticulously carved from genuine African Bloodstone, ensuring a one-of-a-kind appearance.✅ The natural variations in Bloodstone's deep green hues and red speckles make every set truly special.✅ Perfect for Dungeons and Dragons, Pathfinder, or any tabletop RPG, this set makes a unique gift for the discerning adventurer. Important Note: Gemstone dice are delicate and can chip if dropped on hard surfaces. Roll with care on a soft surface like a dice tray or playmat.
$18.99 - $71.99
-
All Systems Go Games Ahznagol, Aberrant Guard (Eldritch Nautical Horror)
Purchase any 3 minis from the Darkest Depths set (this one included) to digitally receive Arisen Depths Pt. III: Beneath the Waves! It is an 89-page 5E module by DM Stash for character levels 13-15. ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99 - $19.99
-
All Systems Go Games Aidoneus, The Fallen One (Male Minotaur God)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$6.99 - $12.99
-
All Systems Go Games Aidreth Treeborn (Female Forest Dryad)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
You have seen 24 out of 2196 products