Bring Your 3D Prints to Life with Neon Orange PLA+
Discover American Filament's premium Neon Orange PLA+ 1.75mm 3D printer filament, expertly crafted in the USA. This eye-catching orange filament delivers exceptional results for both hobbyists and professionals.
Key Features:
Superior Quality: Enhanced durability, impact resistance, and easy printability compared to standard PLA.
Precise Dimensions: 1.75mm diameter with tight tolerances for consistent extrusion and clog-free printing.
Stunning Results: Minimal warping, excellent layer adhesion, and sharp detail for high-quality 3D prints.
Eco-Friendly: Low-odor and environmentally friendly for home and office use.
Wide Compatibility: Prints smoothly on a variety of 3D printers.
Perfect for:
Toys and children's creations
Decorative items and home decor
Unique and eye-catching designs
Prototypes and concept models
Experience the American Filament Difference:
Choose American Filament for high-quality, USA-made 3D printing materials. Our commitment to excellence ensures consistent results and a superior printing experience. Order your Neon Orange PLA+ filament today!
Introducing Neon Orange TOUGH Pro PLA+, the ultimate filament for demanding 3D printing projects. Engineered with NatureWorks Ingeo 3D870 resin, this eco-friendly, bio-based PLA was developed to offer a sustainable alternative to ABS/ASA, making it ideal for functional parts and prototypes.
Offering enhanced durability right off the print bed, TOUGH Pro PLA+ can be annealed for even greater strength and heat resistance. Made in the USA, it delivers ABS-like toughness, PETG-like temperature resistance, and PLA-like smooth printing for consistent, high-performance results. Check out our annealing guide in the resources section below to unlock its full potential!
Unmatched Durability: 8.8x stronger than standard PLA, reaching 12.2x after annealing!
Built to Withstand Heat: Withstands higher temperatures than standard PLA after being annealed.
Engineered for Performance: Crafted with Ingeo 3D870 resin for superior strength and longevity.
Eco-Friendly Choice: Bio-based material for sustainable printing practices.
Effortless Printing: Experience the same smooth printing PLA is known for.
Made in the USA: Manufactured with American quality you can trust.
Resources:
TOUGH Pro PLA+ Technical Data Sheet (TDS)
TOUGH Pro PLA+ Material Safety Data Sheet (MSDS)
Annealing Guide for TOUGH Pro PLA+
Say hi to our Neon Orange Silk PLA Filament €“ vibrant, bold, and full of energy! With its electrifying orange hue and silky smooth finish, this filament is perfect for making your prints stand out. Whether you're crafting something fun, creative, or just want to turn heads, this filament will bring your projects to life with a burst of color!
Bring Your 3D Prints to Life with Neon Pink PLA+
Discover American Filament's premium Neon Pink PLA+ 1.75mm 3D printer filament, expertly crafted in the USA. This eye-catching pink filament delivers exceptional results for both hobbyists and professionals.
Key Features:
Superior Quality: Enhanced durability, impact resistance, and easy printability compared to standard PLA.
Precise Dimensions: 1.75mm diameter with tight tolerances for consistent extrusion and clog-free printing.
Stunning Results: Minimal warping, excellent layer adhesion, and sharp detail for high-quality 3D prints.
Eco-Friendly: Low-odor and environmentally friendly for home and office use.
Wide Compatibility: Prints smoothly on a variety of 3D printers.
Perfect for:
Toys and children's creations
Decorative items and home decor
Unique and eye-catching designs
Prototypes and concept models
Experience the American Filament Difference:
Choose American Filament for high-quality, USA-made 3D printing materials. Our commitment to excellence ensures consistent results and a superior printing experience. Order your Neon Pink PLA+ filament today!
Introducing our Neon Pink Silk PLA Filament €“ fun, fierce, and fabulously vibrant! With its bold neon pink shade and silky smooth finish, this filament is perfect for adding a pop of personality to your prints. Whether you're creating something playful, stylish, or just want to make a statement, this filament will make your projects truly unforgettable!
Purchase any 3 minis from the Crucible of the Chosen set (this one included) to digitally receive with your order Blood for the Gods, a companion 100-page 5E module by DM Stash for character levels 10-11!
----
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
Show off your nerdy side with this "Neutral Evil" shirt! Perfect for any DnD fan, this quirky tee combines humor and style in one. Embrace your inner geek and let everyone know your preferred alignment.
Show off your nerdy side with this "Neutral Good" shirt! Perfect for any DnD fan, this quirky tee combines humor and style in one. Embrace your inner geek and let everyone know your preferred alignment.
NEXA3D XiP Wash and Cure
The Wash+Cure is tailored for washing and post-curing the parts printed on the XiP printer. It's is an all-in-one, automated post-processing system.
NEXA3D XiP Wash and Cure Features
Washing:
Comes with a Wash Bucket with a sealed lid, including a basket designed to accept the XiP build-plate or loose parts
Magnetic stirrers provide consistent cleans with either xCLEAN or Isopropanol
Capacity: 5.5 L
Curing:
Powerful 405 nm LED tower with rotating base
Hood with internal reflectors for additional curing power
Validated curing performance from material partners
[NOTE: The bucket included in the Toolkit is the same as the Wash+Cure bucket. When purchasing the Wash+Cure, you'll then have two buckets to enable two-stage washing.]
Night Blood Dice Resin DND Dice Set!
Unleash your inner vampire with the mesmerizing Night Blood Dice Resin DND Dice Set! Each die is meticulously hand-crafted with swirling black and crimson resin, reminiscent of a moonlit night sky or a vampiric feast.
What's in the box?
✅ 7 Hand-Carved Resin Dice (d4, d6, d8, d10, d%, d12, d20)✅ Free Dice Box (automatically added to cart for full sets) ✅ Felt Pouch (for single d20)
Features:
✅ Each die is lovingly crafted from premium resin, ensuring long-lasting durability and a satisfying weight.✅ Primarily black resin with deep red marbled patterns. The dice have a dark, bold appearance with swirling red accents that create a striking, dramatic effect.✅ Perfect for Dungeons & Dragons, Pathfinder, or any tabletop RPG, this set makes a unique gift for the discerning adventurer.
Resin dice are known for their durability and resistance to chipping or cracking, making them a great choice for regular use.
Gods of the grave watch over the line between life and death. At 1st level, you gain the ability to occasionally sense the presence of the undead.Note: This set has a skull in each shape but due to the random positioning of the skull, you may not be able to see the skull face in every die. Each die will be unique with regard to the skull/smoke/foil positioning. The density of the smoke is random per die, so you may see some shapes with different amounts of smoke.Note: We are now selling a new version of this set that has gold flakes inside. The original version of this set did not have the flakes, so some of the review pictures will not have the gold flakes inside them. Just an FYI :)
7 Dice Set Includes:
1-D4 (21mm)
1-D6 (16mm)
1-D8 (16mm)
1-D10 (17mm)
1-D% (17mm)
1-D12 (18mm)
1-D20 (22mm)
Material: Resin
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
Who needs rescuing when you breathe fire? This bold dragon tee flips the fairytale on its head with the fierce declaration: “I’m no damsel in distress — I’m the dragon.” Perfect for anyone who slays their own monsters, claims their own gold, and doesn’t wait around for a knight in shining armor.
NO TUNE 40/20 Meter End-Fed Antenna with Unique Setup Kit
Overview
This is a very unique antenna designed initially for the Professional Ham Station GO Bag, and now extended to multi-band for MMX. It operates on both 40 meters and 20 meters, and does not need to be tuned. This is accomplished via a unique transformer in the antenna matchbox, but requires a counterpoise to operate correctly. The counterpoise wire is of course included as part of the antenna, and complete setup instructions for a sloper and inverted V configurations are included. The antenna is designed for temporary setup using the included setup kit, and is not intended for a permanent setup. It is a truly stealthy, lightweight, portable antenna. However, we include in the setup kit tags (not shown in the images) and flags to use when stealth is not required, to prevent accidental damage to the antenna or persons running into the virtually invisible wire and paracord. And the antenna kit is packaged in a very handsome waterproof 14 oz heavy duty waterproof canvas zipper pouch, to keep everything together and for easy carrying and storage. Canvas color may vary. Note that each component is within its own ziplock bag inside the canvas bag, to keep things neat and organized.
The Antenna
The antenna itself is designed around information documented by AA5TB in his extensive review of end fed antennas with and without counterpoise wires. As far as we know, our design is unique, and utilizes a fascinating point on the curve where the antenna becomes nearly pure resistive as a load, and thus, is radiating nearly all of the applied power into the atmosphere. It operates well in several configurations, but the easiest to set up are the two mentioned above, sloper and inverted-v. Extensive instructions for setup and takedown are included with the kit in a plastic document folder, and the PDF file is here if you want to print it in another format.
The antenna consists of two PolyStealth AWG 26 wires - one, the antenna main wire, and the other, the required counterpoise. The PolyStealth wire is copper-coated steal multiple strand wire, coated with a black anti-UV and anti-reflective coating. It is extremely difficult to see even when you know where it is! Thus, the included tags and flags.
The Setup Kit
This is a totally unique kit. The goal was to provide a way to quickly set up the antenna without cutting or tying knots, so it would be easy to take down, store, and use again. This is not as easy to achieve as it sounds! We had 3 or 4 forays into the field to test different approaches before we finally found the combination that met our goals. Finding the right components was a very time-consuming process, as well.
Included are two spools with 1.18 mm black paracord - 30' on one, and 15' on the other. These are used for "guy" cables for the two described configurations. In addition, a spool hanger is provided for the inverted V configuration, to prevent the antenna wire from coming in contact with the supporting tree limb or other support, which would seriously detune and reduce efficiency of the antenna.
Also included is a lead weight with carabiner to attach to the 30' or 15' length of paracord for throwing over a tree limb during the setup process. This step must be done carefully, watching out for possible bounce-backs or hitting another person standing on the other side of the support.
There are 3 ground stakes to support the two antenna configurations, as well as 3 flags to place where the ground stakes are located, to prevent damage by accidentally tripping over the stakes and attached wire or paracord. Finally, there are tags that can be attached via a clip to the paracord or antenna to men it visible to anyone walking or running in the vicinity. Of course you would not use these in a true stealth situation.
The Application
This antenna and setup kit were designed specifically for QRP rapid deployment and extraction, for use such as POTA, Field Day, and portable operation. Thus, the antenna and setup kit are lightweight, and stealth when needed. The heaviest item is the lead sinker used as the throw weight. While a local rock can be used as a weight, it is hard to attach a carabiner to a rock! Thus, we include it in the package.
The zipper 14 oz heavy duty waterproof canvas pouch is 13.3" x 9.4" and weighs a mere 1.6 pounds fully loaded with the antenna and setup kit.
Also included
Also included in the package are two additional cables, to attach the antenna to your MMX or DMX transceiver. One is a 3 meter (9.6 feet) SMA male to female LMR-100 cable, and the second is a 8 meter (26 feet) SMA male to female LMR-200 cable. These cables can be combined for a total of 13 meters, or about 37 feet length.
All you need to go on the air is a QRP transceiver, such as the MMX Multi-Band Morse Transceiver. For power, consider the SuperPower Solar Battery System.
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
