Products
-
D20 Collective Smaug's Eye | Giant D20 Moving Eye DnD Dice | Acrylic RPG Gaming Dice
Stay away from his gold and you'll be just fine. Never think he's not watching closely, especially when his treasure hoard is concerned. Clear gray, sharp edge giant D20 single die with floating, moving orange eyeball. Available in 33mm or 50mm. *Liquid in these dice can freeze and cause dice to crack. Please store dice above freezing temperatures.
$18.00 - $27.00
-
Runic Dice Smoke And Blood Handmade Resin DND Dice Set
Smoke And Blood Resin DND Dice Set Embrace the chaos and thrill of battle with this captivating Smoke and Blood dice resin dnd dice set. Each die is meticulously handcrafted from resin, showcasing a unique blend of swirling smoke and crimson hues, reminiscent of a battlefield shrouded in mystery. Perfect for adding a touch of dramatic flair to your tabletop adventures such as D&D or any other RPG games. What's in the box? ✅ 7 Hand-Carved Resin Dice (d4, d6, d8, d10, d%, d12, d20)✅ Free Dice Box (automatically added to cart for full sets) ✅ Felt Pouch (for single d20) Features: ✅ Every die is meticulously handcrafted from resin, ensuring durability and a satisfying weight in your hand, with a unique blend of swirling smoke and blood-red pigments, creating a captivating visual effect.✅ Translucent resin with a striking mix of dark red and smoky gray. The dice feature a blend of swirling red and gray tones, creating a dramatic and eye-catching appearance that resembles wisps of smoke entwined with deep blood-red hues.✅ Perfect for Dungeons & Dragons, Pathfinder, or any tabletop RPG, this set makes a unique gift for the discerning adventurer. Resin dice are known for their durability and resistance to chipping or cracking, making them a great choice for regular use.
$14.99 - $60.99
-
DNDDICE.COM Snake Bite Glow in the Dark Dice Set
Note: To Obtain the Strongest Glow: Charge your dice in front of a strong light source for 30-60 seconds, prior to turning off the lights. 7 Dice Set Includes: 1-D4 (17mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (16mm) 1-D% (16mm) 1-D12 (18mm) 1-D20 (20mm) Material: Resin
$9.00
-
DNDDICE.COM Sneak Attack Dice Set
Note: Dice made for a Rogue. The Daggers inside are made of metal but should not affect the roll quality to a noticeable degree. 7 Dice Set Includes: 1-D4 (21mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (17mm) 1-D% (17mm) 1-D12 (18mm) 1-D20 (22mm) Material: Resin
$15.00
-
All Systems Go Games Snippy, Bladeclaw Crab
Purchase any 3 minis from the Blood on the Sails set (this one included) to digitally receive its companion module! It is a 116-page 5E module by DM Stash for character levels 3-4, with stat blocks and lore for every miniature in this set. ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$17.99
-
All Systems Go Games Snow Blight (Female Undead Human Fighter)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
DNDDICE.COM Snow Blind Dice Set
Note: This set is slightly larger than normal. 7 Dice Set Includes: 1-D4 - (18mm) 1-D6 - (17mm) 1-D8 - (17mm) 1-D10 - (17mm) 1-D% - (17mm) 1-D12 - (19mm) 1-D20 - (22mm) Material: Acrylic
$8.00
-
DNDDICE.COM Snowflakes Metal Dice Set (Gift Box)
7 Dice Set Includes Gift Box: 1-D4 (21mm) 1-D6 (17mm) 1-D8 (17mm) 1-D10 (19mm) 1-D% (19mm) 1-D12 (21mm) 1-D20 (24mm) Material: Copper
$40.00
-
D20 Collective Snowy Owl - 7 Piece DnD Dice Set | Acrylic RPG Gaming Dice
Don't let their beauty distract you from their damaging talons. Marbled white dice with black numbers.
$9.00 $8.00
-
PreppComm Software Upgrade
PreppComm Announces: Software update for MMX and DMX-40 Applies to all DMX-40 and MMX shipped before 3/15/23 This product is a software upgrade for a DMX or MMX to the current software release: Firmware 27.3Graphics 31.0 This information (firmware and graphics version numbers) is now displayed at the bottom corners of the MENU screen, and the Graphics version is no longer shown on the BOOT SPLASH screen. This is the software update you have been waiting for! The following bugs have been eradicated, snuffed out, blown away, even fixed: 1) The blackout bug: this bug caused to LCD screen to stop operating after 10 minutes, thus essentially defeating the entire purpose of the 3-minute shut off of the backlight. Now, your DMX-40 or MMX will run essentially forever, and the screen will turn on for any screen activity. This includes volume changes (which change the volume setting on the screen), decoder output, the ESC key, etc. Note that the ESC key will also throw you into CTX mode, so a double ESC is required, but that also clears the current transmit speed setting. Our suggestion? See below.You might ask why did it take me so long to find this bug? Well, I have been looking under the wrong rock. The bug was inserted unintentionally way back when the project just began, in 2017, in the graphics firmware. A command to sleep after 10 minutes. We never sent a wakeup command, because we were just turning on and off the backlight in the DMX firmware. That single line of code hid in the boot screen code where I would never look. Until now. Thank you Jesus for helping me to think of this rock to look under for this ugly bug!The # bug: this bug replaced received Z characters with # characters. Fixed. 2) RETRY key in Typing Speed Test Not Working: Fixed 3) Execution of RPL by touching bug: some parts of a RPL microprogram would not be executed properly when executed by touching the macro from the macro screen. Corrected. Now you can execute either from the keyboard function keys or by touching a microprogram in the microprogram menu. 4) Double Quote bug: the double quote character typed during transmit, or received does not show up on the LCD screen, and the line is terminated early. This has been worked around by substituting a single quote for a double quote. This does not affect the transmission of the double quote. It is only a display issue. This is a work-around. Other recently fixed bugs and added new features: 1) NEW KEY COMMAND: The B key now toggles the backlight. This is in addition to the automatic turn-off after 3 minutes of no screen activity and the automatic turn-on with screen activity. This is our recommended way to turn on the darkened screen. 2) Added FOUR NEW COMMANDS TO RPL to provide a counting function for support for contests: 1. ^0 sets the variable to zero 2. ^+ increments the variable 3. ^- decrements the variable 4. ^? outputs or prints the value 3) Other improvements in decoder and ESC key processing and other areas that may already be in your current MMX or DMX-40, depending on when they were shipped. Software updates are always free. Why do I have to pay $50? Well, there is a small matter of shipping and I do have to pay the employees to do the work of receiving, unboxing and recording, testing, disassembly, programming 3 separate processors, reassembly, testing, QA, packaging and shipping back to you. I also pay shipping back. I do need to charge for the services provided by the employees and UPS or USPS. These are "direct expenses." There is no charge for the actual software update, which represents significant effort from R&D department (me). USA Customers: Please ship your transceiver(s) with lid(s) to the address below. Please do not ship anything other than the transceiver/lid combo(s). We strongly recommend you ship with the lids attached to avoid damage to the LCD or LED's during shipment. PLEASE INSURE your shipment for the FULL VALUE. The shipment remains as your responsibility up to the time we accept the transceiver. Thus, if the shipment is lost, you must seek compensation from the insurer. If we receive a damaged box, we will check to see if the transceiver is damaged. If so, we will document the damage with photos, and send them to you, along with our estimate for repair. You then must seek compensation from your insurer, as we will invoice you for the repairs, at your request. We will fully insure your package on the return trip. INTERNATIONAL Customers Please disassemble your transceiver, using the step-by-step process below. Ship the front panel and LCD/switch assembly in a small box wrapped in antistatic bubblewrap or placed in an anti-static bag and wrapped with standard bubblewrap to the address below. The smaller the box, the less expensive the shipping! For HS code 8517.62.00, and in the NOTES indicate it is a warranty repair. In this way, there will be no issues in customs. PLEASE INSURE your shipment for the FULL VALUE. The shipment remains as your responsibility up to the time we accept the transceiver. Thus, if the shipment is lost, you must seek compensation from the insurer. If we receive a damaged box, we will check to see if the transceiver is damaged. If so, we will document the damage with photos, and send them to you, along with our estimate for repair. You will have to seek compensation from your insurer, as we will invoice you for the repairs, at your request. We will fully insure your package on the return trip. SHIPPING TO ADDRESS: Please use the address below for faster processing of your order: Software Update ℅ PreppComm130 McGhee Rd, Ste 220Sandpoint, ID 83864 =========================== DISASSEMBLY STEPS (INTERNATIONAL ONLY) 1. Use static precautions. Don't touch the PCB, only hold by the edges. Disconnect all wires connected to the transceiver. 2. Using a Philips screwdriver, remove the two screws from the rear panel. 3. Using a Philips screwdriver, remove the four screws at the corners of the top panel. 4. Carefully remove the electronics by tilting up on the right side, and then upwards. 5. Turn over, and locate the two power switch wires. Unplug the wires from the connector on the transceiver PCB. 6. Locate four white nylon stand-offs, or, on older DMX-40's, hex nuts, holding the transceiver PCB in place. 7. Using a nut driver, carefully remove the four stand-offs or hex nuts. 8. Locate the 10-pin connector at the rear left of the transceiver PCB that is connecting it to the front panel PCB. 9. Pull the transceiver PCB straight up carefully to disengage from the mounting posts and the connector. Rocking the PCB slightly will ensure connector separation without bending the pins. 10. Set the transceiver PCB into the bottom of the case, and cover with the lid. This is a good way to protect it while you wait for the replacement with updated software. The front panel, with power switch and LCD panel still attached, is what you are shipping to the factory for the software update. 11. Place in an anti-static bag, wrap in at least one layer of bubblewrap, and put into a strong small box for shipping. A 4" x 6" x 2" box is perfect, as long as it is made of strong cardboard, not thin cardboard. This also gives you space for the label on top, and customs forms on the bottom of the box. Finally, the shipping cost will be low due to small size and weight. To ASSEMBLE, reverse this process.
$50.00
-
DNDDICE.COM Solar Flare Handmade Dice Set
Note: These dice are handmade, hand-polished, and hand-painted. They are very sharp. Please handle with care. Handmade dice may not be 100% perfect, and may have tiny imperfections. 7 Dice Set Includes: 1-D4 (24mm) 1-D6 (17mm) 1-D8 (17mm) 1-D10 (18mm) 1-D% (18mm) 1-D12 (19mm) 1-D20 (22mm) Material: Resin
$35.00
-
All Systems Go Games Sonari, the Bridled Bat Monstrosity
Purchase any 3 minis from the Drow From Beyond set (this one included) to digitally receive its companion module, Elsebound Chronicles: Pt. 1 - Web of Worlds! It is a 116-page 5E module by DM Stash for character levels 8-9, with stat blocks and lore for every miniature in this set. ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$59.99
-
All Systems Go Games Sonatus Noctursa, Northern Masked Owlbear
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$10.99
-
All Systems Go Games Sony Jona (Female Elf Sorceress)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
Sunburst RPG Sorcerer Class Definition T-Shirt
Unleash your inner magic with this hilariously punny Sorcerer Class Definition tee. Perfect for DnD fans, this shirt features a playful definition of the sorcerer class. Show your love for dungeons & dragons with this unique tshirt!
$29.99 - $30.99
-
Sunburst RPG Sorcerer Class T-Shirt – 'Eat, Sleep, Metamagic, Repeat'
Channel your inner sorcerer with our 'Eat, Sleep, Metamagic, Repeat' t-shirt! Designed specifically for the sorcerers of Dungeons & Dragons who master the arcane arts through sheer force of will, this tee is essential for anyone who harnesses the power of Metamagic.
$29.99 - $30.99
-
All Systems Go Games Sorngaar, the Cindering (Elemental Rock Guardian)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$10.99
-
All Systems Go Games Soulless Bloodseeker: Sculpt A (Male Vampire Warrior)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Soulless Bloodseeker: Sculpt B (Male Vampire Warrior)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Soulless Bloodseeker: Sculpt C (Female Vampire Warrior)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Soulless Bloodseeker: Sculpt D (Female Vampire Warrior)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Soulless Bloodseeker: Sculpt E (Male Vampire Warrior)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Soulless Bloodseeker: Sculpt F (Female Vampire Warrior)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Sovram the Betrayed (Elder Black Dragon)
Purchase any 3 minis from the Clash of the Dragons set (this one included) to digitally receive its companion module! It is a 120-page 5E module by DM Stash for character levels 6-7, with stat blocks and lore for every miniature in this set. ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$199.99
You have seen 2136 out of 2553 products