Products
-
DNDDICE.COM Polar Cubs Dice Set
Polar Bears Run Wild in this Cute Winter Set. 7 Dice Set Includes: 1-D4 (20mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (17mm) 1-D% (17mm) 1-D12 (18mm) 1-D20 (22mm) Material: Resin
$15.00
-
DNDDICE.COM Pompeii Dice Set
7 Dice Set Includes: 1-D4 (18mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (16mm) 1-D% (16mm) 1-D12 (18mm) 1-D20 (20mm) Material: Resin
$9.00
-
All Systems Go Games Pontifax the Emerald Eyed (Male Fey Elf Wizard)
Purchase any 3 minis from The Fey Court set (this one included) to digitally receive its companion module! It is a 106-page 5E module by DM Stash for character levels 5-6, with stat blocks and lore for every miniature in this set. ---- All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99 - $17.99
-
DNDDICE.COM Powder Keg Dice Set
7 Dice Set Includes: 1-D4 (19mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (16mm) 1-D% (16mm) 1-D12 (18mm) 1-D20 (22mm) Material: Resin
$8.00
-
DNDDICE.COM Prairie Flowers Dice Set
Note: The flowers are not heavy and should not affect the rolls to a noticeable degree. 7 Dice Set Includes: 1-D4 (18mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (16mm) 1-D% (16mm) 1-D12 (18mm) 1-D20 (20mm) Material: Resin
$14.00
-
Premium pique polo shirt
This polo is made from thick, soft fabric and features a matching-color button placket for a sleek look. It provides all-day comfort for sports or everyday wear and keeps you looking sharp wherever you go. • 100% combed ring-spun cotton • Grey Melange color is 85% cotton, 15% viscose • Fabric weight: 6.2 oz./yd.² (210 g/m²) • Classic fit • Ribbed collar • Tone-on-tone 3-button placket • Straight hem with side slits • Spare button on the inside seam • Blank product sourced from Bangladesh This product is made especially for you as soon as you place an order, which is why it takes us a bit longer to deliver it to you. Making products on demand instead of in bulk helps reduce overproduction, so thank you for making thoughtful purchasing decisions!
$24.99 - $32.99
-
PreppComm PreppComm Magnetic Loop Antenna
PreppComm α Magnetic Loop This 1.5 lb. VHF, UHF, HF Alpha PREPPCOMM α MagLoop includes a nine foot feed line with low loss BNC connector, plus built-in and removable two-piece tripod legs, making this the perfect POTA, SOTA, home, or portable antenna for tabletop, desktop, park bench, and or deployment on the floor or ground. Specifications • Tunable from 7 MHz to 21.450 MHz plus 2 Meters and 440MHz. • Rated at 100W PEP SSB, 50W CW, or 25W digital. • IP Rating is IP-53: Protected against dust limited ingress, no harmful deposits. Protected against direct sprays of water up to 60 degrees from the vertical. • Environmental operating parameters: -15 to 130 degrees Fahrenheit and winds up to 25 Mph before needing additional weight. • Weight: 24 Ounces, 1.5 lbs. or 0.68 Kg. Included 1 – 25 inch mast in two pieces that couple together, 3 – 22-inch tripod leges in two pieces that couple together, 1 – Tuning box with 3 built-in female tripod leg inserts and 1 female 5/8 11 tripod mount, 1 – Fine tuning fulcrum rod, 1 – BNC Female to UHF PL259 Male adapter, 1 - BNC Female to SMA male to mate with the SMA type cable connectors 1 – Outer LMR400 heavy duty coax loop, 1 – Inner shielded faraday loop with a 9' feed line and BNC connector, and 1 – PreppComm zippered Field Bag. This antenna is truly a breakthrough - the size and weight for portability is truly a step forward from portable magnetic loops of the past, and the built-in tuner uses a unique; and easy to use tuning system. Construction is top quality to ensure long life in both wet and dry climates. The antenna can be operated indoors or outdoors, however better results will be attained outdoors. For best results indoors, operate near a window that faces the direction you wish to transmit toward. Focus is on the rim, not through the center, as most suppose! The antenna is 20" in diameter. Materials Used Isn’t it obvious why the price is high when you see the following materials used in the construction of the PREPPCOMM α MagLoop antenna? Gold, Solder, Ceramic, Aluminum, Stainless steel, Marine shrink tubing, Times Microwave LMR400, and Carbon Fiber infused polymers. This Magnetic Loop is a great companion to your MMX, DMX-40, or MMX Nomad because it is just as fast, if not faster, to set up and take down as the NO TUNE End Fed antenna, is more compact and easy to aim, not fixed in direction like the End Fed, and can be even operated indoors. However, you do lose some signal strength from the smaller size compared to the long wire End Fed antenna. Assembly 1. Assemble the mast and insert into the tuning unit (photo 3) 2. Uncoil the LMR400 outer loop, and carefully determine the center. Attach the center to the top of the mast by pressing into the slot, and form the LMR400 into a loop. 3. Plug the PL239 connectors into the tuning unit, and tighten. Hold the LMR400 in position so the connector can be tightened all the way in. 4. Now you should have something looking like photo 4. 5. Place the inner loop top into the slot at the top of the mast, centered. 6. Attach the small inner loop via the two clips to the outer loop, as shown in photo 5. 7. Put the three legs together, and push the top end into the angled holes provided in the underside of the tuning unit. Note: the two pieces are held together by the weight of the antenna above, so during assembly you have to make sure you provide support so they don't separate. 8. Now you have a complete Magnetic Loop, as shown in photo 6. Connect to the transceiver. Tuning the Antenna For UHF/VHF, tuning is by adjusting the spacing on the clips holding the inner loop to the outer loop. For HF, the tuning rod (see photo 2) is used. Slowly turn the rod, looking for the place where the background noise in your receiver gets much louder. Note this position of the rod: this position is for the band you are using, so you can move to this position quickly the next time. Now, carefully adjust for maximum noise in the receiver. If you have a tuning mode, or an SWR meter, after you have found the maximum background noise point, you can then turn on the transmitter in a low power mode, and make finer adjustments with the tuning rod via lower SWR. Specifications, prices, and descriptions are subject to change without notice.
$427.00
-
PreppComm PreppComm Mini Go Bag Bundles
PreppComm Mini GO Bag Bundles Bundle price includes 20% off of accessories in the bundle! All variants of the Mini GO Bag are based on the PreppComm Mini GO Bag custom shoulder and messenger bag. This bag is small and lightweight, but packs 6 separate storage areas, and expands to hold a complete ham station! HF Mini GO Bag This variant of the bag adds in the NO TUNE 40/20 Antenna and Setup KIt, as well as an S2X-2 Stand. Antenna components are stored in an external canvas bag. Two other variants include the HF Mini GO Bag bundled with an MMX or DMX transceiver. Notes none of the GO Bag bundles includes a powered speaker. Rather, a small set of wired earbuds is included to save space. Also, the entire antenna setup kit is not shown, but all the components are included and shipped inside the PreppComm Mini Go Bag. For more details on what is included in the antenna setup kit, please refer to the NO TUNE 40/20 Antenna details.
$318.00 - $667.00
-
PreppComm PreppComm Solar Battery
PreppComm Solar Battery This 20,000 mah battery has it all: a high-efficiency solar panel on one side, a 4-led battery status and charging level indicator, a green led charging indicator, a lensed flashlight, two ways to charge (USB micro or USB C), and dual USB 2 amp outputs, protected behind a soft plastic cover to keep dirt out. And best of all, this battery packs 20,000 mah (milli-amp hours) or 20 amp hours of power. It can charge your phone and run your MMX at the same time as it is charging, including plugging in an external solar panel into the USB C connector. There is even a compass on the back side! Just in case you need it in an emergency. The packaging is heavy-duty and this product feels great in your hand. A single power button does multiple things: 1. A single short press will turn on the charge indicator if you are in a dark area. The charge indicator - 4 blue LED's and a green LED - will always light up under indoor and outdoor lighting automatically due to the solar panel on the top of the battery. 2. A single long press will turn on the flashlight. a subsequent short press will set to SOS mode, and another will set strobe mode. Finally, the fourth short press will turn off the flashlight. The 5 led battery charge and status indicator will be active under normal indoor and outdoor daylight without pressing the button, as the built-in solar panel will start charging as soon as there is light on the surface. Note that covering some of the surface may block charging. This battery is capable of powering an MMX in normal operation for 10-12 days, based on 4 hours use per day including 1 hour of transmit, without any recharging. We recommend an hour a day of charging to maintain battery levels, using our solar panel.
$49.00 $33.00
-
PreppComm PreppComm ɑ End Fed NO TUNE 80/40/20 Antenna
PreppComm ɑ End Fed NO TUNE 80/40/20 Antenna Unlike the PreppComm NO TUNE 40/20 antenna, which is a complete system for rapid deploy and repacking, this end fed is designed for permanent installation. However, it is also possible to use in a temporary setup by providing the needed additional components (not included). The antenna can be used without a tuner with a reasonable SWR, or perfect SWR if you add an antenna tuner (not included). The antenna is approximately 60 feet long, and supports 250W PEP SSB, 125W CW, and 25W digital. The antenna can achieve good SWR at 80M, even though the antenna is approximately the same length as our NO TUNE 40/20 antenna, which only operates on 40 and 20 meters. This is due to a different transformer design. The SWR performance is actually better at 80M (SWR = 2.1) than at 40M (SWR = 2.7), but gets better at 20M (SWR = 2.2). All of these SWR’s will be sufficiently low for the MMX series to operate safely. If a tuner is used, then the SWR can be adjusted very close to 1:1. The antenna comes with two terminals to attach the wires, and an eye bolt on the other side of the main transformer, along with the RF connector. The antenna wire attaches to the two terminals, and ends with insulators at the other end. The antenna is rigged using the eye bolt and the insulators via non-conductive support cables (not included). Deploy the antenna in a sloper configuration (low near the transceiver, high at the other end, perhaps via a tree and support line) or horizontal configuration at least 6’ off the ground. A sloper configuration will provide both NVIS and DX functionality, while horizontal near the ground will primarily provide NVIS operation. For DX focus, install in a horizontal configuration as high as possible. Keep at least 6’ from trees, buildings and foliage for best results. Use longer support lines to the included insulators and the eye bold on the main transformer unit to keep antenna free from obstacles..The feed line attaches via a PL-239 plug on the support end of the transformer. Antenna is shipped separately from a separate location. The shipping cost is included in the price.
$246.00
-
DNDDICE.COM Pretty Pretty Princess Dice Set
Note: This set has a cloudy base with a clear section filled with many kinds of pink bows! The look of each die will be unique, as they are mixed by hand. 7 Dice Set Includes: 1-D4 (19mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (16mm) 1-D% (16mm) 1-D12 (18mm) 1-D20 (21mm) Material: Resin
$12.00
-
DNDDICE.COM Pride Dice Sword Enamel Pin
This is an alternate version of our popular dice sword enamel pin, which was made specifically for the LGBTQ+ community. We hope you like the pin and wear it with Pride ^_^ Enamel Pin Stats: Width 30mm Height 77mm Material: Zinc Alloy + Hard Enamel King of Crits ™ Exclusive Design ©2021
$8.00
-
American Filament Primer Gray AF PLA+ 3D Printer Filament, 1.75 mm Diameter
Discover the Versatility of Primer Gray PLA+ Discover American Filament's premium Primer Gray PLA+ 1.75mm 3D printer filament, expertly crafted in the USA. This versatile neutral gray filament delivers exceptional results for both hobbyists and professionals. Key Features: Superior Quality: Enhanced durability, impact resistance, and easy printability compared to standard PLA. Precise Dimensions: 1.75mm diameter with tight tolerances for consistent extrusion and clog-free printing. Stunning Results: Minimal warping, excellent layer adhesion, and sharp detail for high-quality 3D prints. Eco-Friendly: Low-odor and environmentally friendly for home and office use. Wide Compatibility: Prints smoothly on a variety of 3D printers. Perfect for: Prototypes and concept models Painting and finishing projects Functional parts and accessories Versatile base color for multiple applications Experience the American Filament Difference: Choose American Filament for high-quality, USA-made 3D printing materials. Our commitment to excellence ensures consistent results and a superior printing experience. Order your Primer Gray PLA+ filament today!
$12.99 - $25.99
-
All Systems Go Games Prince Viorel of Rose Keep (Male Beast Noble)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$10.99
-
All Systems Go Games Princess Chamomile (Female Human Assassin)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
All Systems Go Games Princess Chamomile on Mirajah (Female Human Assassin with Tiger Mount)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$10.99
-
All Systems Go Games Princess Kseerkix (Goliath Yuan-ti Pinup)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$10.99
-
All Systems Go Games Princess Thamin (Female Tabaxi Noble)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$5.99
-
DNDDICE.COM Prismatic Dragon Metal Dice Set (Gift Box)
7 Dice Set Includes Gift Box: 1-D4 (21mm) 1-D6 (18mm) 1-D8 (18mm) 1-D10 (17mm) 1-D% (17mm) 1-D12 (21mm) 1-D20 (24mm) Material: Copper
$40.00
-
DNDDICE.COM Prismatic Obelisk Obsidian Dice Set (Gift Box)
Note: This rainbow brightness of this set will vary depending on the amount of light shining on it. It may appear slightly dull in low light situations. 7 Dice Set Includes Gift Box: 1-D4 (20mm) 1-D6 (16mm) 1-D8 (17mm) 1-D10 (17mm) 1-D% (17mm) 1-D12 (19mm) 1-D20 (20mm) Material: Obsidian
$90.00
-
DNDDICE.COM Prospector Gold Dice Set
7 Dice Set Includes: 1-D4 (19mm) 1-D6 (16mm) 1-D8 (16mm) 1-D10 (17mm) 1-D% (17mm) 1-D12 (18mm) 1-D20 (22mm) Material: Resin
$12.00
-
Creality Official Store Protective Cover for Laser Engraver
Protective Cover for Laser Engraver Enclosed Design to Isolate Smoke Expel Smoke, Keep Clean Large Viewing Design for Real-time Observation Easy Installation, Higher Durability Larger Size, Wider Compatibility
$99.00 $59.99
-
DNDDICE.COM Psionic Blast Liquid Core Dice Set
Note: The D4 in this set has a special teardrop shape. The glitter is suspended in a liquid core and will move around while the dice are in motion. The liquid core is hand placed in each shape and may not be perfectly centered. Note: These dice are handmade, hand-polished, and hand-painted. They are very sharp. Please handle with care. Handmade dice may not be 100% perfect, and may have tiny imperfections. 7 Dice Set Includes: 1-D4 (16mm) 1-D6 (17mm) 1-D8 (17mm) 1-D10 (18mm) 1-D% (18mm) 1-D12 (19mm) 1-D20 (22mm) Material: Resin
$40.00
-
All Systems Go Games Pterowyvern Rider: Sculpt A (Pterodactyl Cavalry Unit)
All our 3D printed minis come free of supports and fully cleaned and cured. They are supplied unprimed & unpainted, and they ship assembled unless the miniature has several interchangeable accessories included with it, or the customer requests it to be shipped unassembled. Stock photos are 3D renders of the models, and are not the color we typically print in (we use Navy Grey as our default). Any additional photos on a mini page are going to be actual photos of the models we print!
$14.99
You have seen 1848 out of 2554 products